Rancang Bangun Sistem Pemberi Pakan Ikan Otomatis Berdasarkan Temperatur Air Pada Kolam Ikan Nila Menggunakan Sensor Suhu DS18B20

Authors

  • Hiliyah Fitri Universitas Andalas
  • Rahmat Rasyid Universitas Andalas

DOI:

https://doi.org/10.25077/jfu.12.1.137-143.2023

Keywords:

Ikan nila, Sensor DS18B20, Sensor load cell, Temperatur air

Abstract

Telah dirancang sistem pemberi pakan ikan otomatis berdasarkan temperatur air menggunakan sensor DS18B20. Sistem ini bekerja dengan cara memberikan pakan ikan nila dengan waktu yang telah ditentukan dan berdasarkan temperatur air pada kolam ikan nila. Sensor DS18B20 digunakan untuk mengukur temperatur air pada kolam ikan nila dan sensor load cell digunakan untuk menimbang jumlah pakan ikan yang harus diberikan. Data yang telah diperoleh kemudian diproses oleh mikrokontroler yang ada pada Arduino Uno dengan menggunakan bahasa pemograman Arduino IDE, kemudian pada LCD ditampilkan tanggal, waktu, suhu air, dan jumlah pakan yang diberikan. Ketika jam menunjukkan pukul 07.00 dan pukul 16.00 motor servo akan otomatis terbuka dan memberikan pakan sesuai dengan suhu air pada kolam ikan. Persentase error yang didapatkan pada pengujian sensor DS18B20 sebesar 0,25%, sensor load cell dengan kapasitas massa maksimum 1 kg memiliki persentase error sebesar 0,97 %, dan hasil rata-rata error untuk massa ikan 200 g adalah 2,28 % dan untuk massa ikan 220 g adalah 3,61 %.

References

Amalia, R., Amrullah., & Suriati, 2018, Manajemen Pemberian Pakan Pada Pembesaran Ikan Nila (Oreochromis niloticus), Prosiding Seminar Nasional Sinergitas Multidisiplin Ilmu Pengetahuan dan Teknologi (SMIPT), pp. 252-257.

Feranita, Firdaus, Safrianti, E., Sari, L.O., & Fadilla, A., 2019, Sistem otomatisasi alat pemberi pakan ikan lele berbasis arduino uno, Seminar FORTEI, pp. 33-37.

Kementerian Kelautan dan Perikanan, 2019, Laporan Kinerja Direktorat Jendral Perikanan Budidaya Kementerian, Kelautan dan Perikanan, viewed Maret 2022, <http://kkp.go.id/artikel/28333-laporan-kinerja-kkp-2020>

Marliza, Y., & Aisuwarya, R., 2021, Rancang Bangun Sistem Pemberian Pakan Ikan Secara Otomatis Perilaku Ikan Menggunakan Kamera Barbasis Mini PC, Journal on Computer Hardware, Signal Processing, Embedded System and Networking, vol 2, no. 1, pp, 11-19.

Pradhana, S., Fitriyah, H., & Ichsan, M.H.H., 2021, Sistem Kendali Kualitas Air Kolam Ikan Nila dengan metode Jaringan Syaraf Tiruan berdasarkan pH dan Turbidity berbasis Arduino Uno, Jurnal Pengembangan teknologi Informasi dan Ilmu Komputer, vol. 5, no. 10, pp. 4197-4204.

Prastica, S., & Sardi, J., 2020, Sistem Otomatisasi Alat Pemberi Pakan Ikan Lele Berbasis Arduino Uno, Jurnal Teknik Elektro Indonesia (JTEIN), vol. 1, no. 2, pp. 33-37.

Samsu, N., 2020, Peningkatan Produksi Ikan Nila Melalui Pemanfaatan Pekarangan Rumah Nonproduktif dan Penentuan Jenis Media Budidaya yang Sesuai, Deepublish, Yogyakarta.

Saputra, D.A., Amarudin., dan Rubiyah, 2020, Rancang Bangun Alat Pemberi Pakan Ikan Menggunakan Mikrokontroler, Jurnal Ilmiah Mahasiswa Kendali dan Listrik, vol. 1, no. 1, pp. 7-13.

Sihombing, P.C., 2018, Pengaruh Perbedaan Suhu Air terhadap Pertumbuhan dan Kelangsungan Hidup Ikan Nila (Oreochromis niloticus), Skripsi, Universitas Sumatera Utara, Medan.

Downloads

Published

2023-03-08

How to Cite

Fitri, H., & Rasyid, R. (2023). Rancang Bangun Sistem Pemberi Pakan Ikan Otomatis Berdasarkan Temperatur Air Pada Kolam Ikan Nila Menggunakan Sensor Suhu DS18B20. Jurnal Fisika Unand, 12(1), 138–144. https://doi.org/10.25077/jfu.12.1.137-143.2023

Issue

Vol. 12 No. 1 (2023)

Section

Articles

License

Copyright (c) 2023 Jurnal Fisika Unand

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

Please find the rights and licenses in JFU (Jurnal Fisika Unand).

1. License

The non-commercial use of the article will be governed by the Creative Commons Attribution license as currently displayed on Creative Commons Attribution-NonCommercial 4.0 International License.

2. Authors Warranties

The author warrants that the article is original, written by stated author(s), has not been published before, contains no unlawful statements, does not infringe the rights of others, is subject to copyright that is vested exclusively in the author and free of any third party rights, and that any necessary written permissions to quote from other sources have been obtained by the author(s).

3. User Rights

JFU's spirit is to disseminate articles published are as free as possible. Under the Creative Commons license, JFU permits users to copy, distribute, display, and perform the work for non-commercial purposes only. Users will also need to attribute authors and JFU on distributing works in the journal.

4. Rights of Authors

Authors retain the following rights:

  • Copyright, and other proprietary rights relating to the article, such as patent rights,
  • The right to use the substance of the article in future own works, including lectures and books,
  • The right to reproduce the article for own purposes, provided the copies are not offered for sale,
  • The right to self-archive the article.

5. Co-Authorship

If the article was jointly prepared by other authors, the signatory of this form warrants that he/she has been authorized by all co-authors to sign this agreement on their behalf, and agrees to inform his/her co-authors of the terms of this agreement.

6. Termination

This agreement can be terminated by the author or JFU upon two months notice where the other party has materially breached this agreement and failed to remedy such breach within a month of being given the terminating partys notice requesting such breach to be remedied. No breach or violation of this agreement will cause this agreement or any license granted in it to terminate automatically or affect the definition of JFU.

7. Royalties

This agreement entitles the author to no royalties or other fees. To such extent as legally permissible, the author waives his or her right to collect royalties relative to the article in respect of any use of the article by JFU or its sublicensee.

8. Miscellaneous

JFU will publish the article (or have it published) in the journal if the articles editorial process is successfully completed and JFU or its sublicensee has become obligated to have the article published. JFU may conform the article to a style of punctuation, spelling, capitalization, referencing and usage that it deems appropriate. The author acknowledges that the article may be published so that it will be publicly accessible and such access will be free of charge for the readers.