Rancang Bangun Prototype Sistem Smart Greenhouse Untuk Sayur Bayam (Amarantus hybridus l.) Berbasis Internet of Things (IoT)
DOI:
https://doi.org/10.25077/jfu.11.4.494-500.2022Abstract
Telah dihasilkan prototype sistem smart greenhouse untuk sayur bayam (Amarantus hybridus L.) menggunakan mikrokontroler Arduino Uno dan aplikasi Blynk. Sistem smart greenhouse akan mempermudah petani untuk memonitoring parameter lingkungan, seperti kelembaban tanah, suhu, kelembaban udara dan ketersedian air pada tanki. Prototype dirancang menggunakan sensor DHT11, sensor YL-69, sensor ultrasonik HC-SR04, module ESP8266-01, relay 4 channel, mikrokontroler Arduino Uno, dan Aplikasi Blynk. Saat parameter lingkungan smart greenhouse terdeteksi berbeda dengan nilai parameter optimal pertumbuhan sayur bayam, Arduino Uno akan menghidupkan relay dan pompa air agar parameter lingkungan smart greenhouse tetap terjaga. Penggunaan sistem smart greenhouse menghasilkan selisih ketinggian penanaman tumbuhan sampel A dan sampel B sebesar 0,5 cm. Pengendalian lingkungan smart greenhouse menggunakan aktuator lampu dan spray nozzle yang dikontrol melalui mikrokontroler Arduino Uno dapat membantu mempengaruhui faktor lingkungan dan pengoptimalan pertumbuhan sayur bayam.References
Bafdal, N. dan Ardiansah, I., 2020, Smart Farming Berbasis Internet of Things dalam Greenhouse, UNPAD Press, Jatinagor.
Bahariawansyah, A. S., Susrama, I. G., dan Akbar, F, A., 2021, ‘Perancangan Alat Pengendalian Lingkungan Greenhouse Berbasis Blynk’, Jurnal Penelitian Politeknik Penerbangan Surabaya, Vol. 6, No.1, pp. 12–22.
Firdhausi, A. R., Budiyanto, A., dan Nurcahyani, I., 2018, ‘Rancang Bangun Smart greenhouse untuk Budidaya Tanaman Cabai berbasis Android’, Prosiding Nasional Rekayasa Teknologi Industri dan Informasi, pp. 16–22.
Gunasekhar, P., Likhita, M., Rachel. J. K., Monika, C. M., dan Krishnan, L., 2020, ‘Green House Monitoring and Control System Using IoT’, Journal of Xidian University, Vol. 4, No. 9, pp. 893-897.
Nugroho, A., Asyroh. M. F. K., Pangestu. A., dan Wulandari. B., 2018, ‘Pengatur Suhu dan Kelembaban Kumbung Jamur Otomatis’, Electronics, Informatics, and Vocational Education (ELINVO), Vol. 3, No. 2, pp. 48-53.
Ramli, N; Mohd Sobani, S. S. dan Yuliana, A., 2020, ‘Rancang Bangun Sistem Monitoring Pertumbuhan Tanaman Cabai Menggunakan Arduino Bertenaga Surya Terintegrasi Internet of Things (IoT)’, Jurnal Teknologi, Vol. 7, No. 1, pp. 19–25.
Sulfiani R, N., dan Firmawati, N., 2019, ‘Rancang Bangun Sistem Penyemprot Tanaman Otomatis Berdasarkan Waktu dengan Real Time Clock (RTC) dan Sensor Ultrasonik Serta Notifikasi Via SMS’, Jurnal Ilmu Fisika (JIF), Vol. 11. No. 22, pp. 62-71
Suryawan, M. A., Ode, L., dan Sujasmin, M., 2021, ‘Penerapan Sistem Kontrol Air Dan Suhu Pada Greenhouse Hidroponik. Jurnal Informatika’, Vol. 10, No. 1, pp. 1–9.
Ulinuha, A., Riza, A. G., 2021, ‘Sistem Monitoring Dan Penyiram Tanaman Otomatis Berbasis Android Dengan Aplikasi Blynk’, Jurnal Pengabdian Masyarakat Teknoyasa, Vol. 2, No.1, pp. 26–31.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2022 Jurnal Fisika Unand
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Please find the rights and licenses in JFU (Jurnal Fisika Unand).
1. License
The non-commercial use of the article will be governed by the Creative Commons Attribution license as currently displayed on Creative Commons Attribution-NonCommercial 4.0 International License.
2. Authors Warranties
The author warrants that the article is original, written by stated author(s), has not been published before, contains no unlawful statements, does not infringe the rights of others, is subject to copyright that is vested exclusively in the author and free of any third party rights, and that any necessary written permissions to quote from other sources have been obtained by the author(s).
3. User Rights
JFU's spirit is to disseminate articles published are as free as possible. Under the Creative Commons license, JFU permits users to copy, distribute, display, and perform the work for non-commercial purposes only. Users will also need to attribute authors and JFU on distributing works in the journal.
4. Rights of Authors
Authors retain the following rights:
- Copyright, and other proprietary rights relating to the article, such as patent rights,
- The right to use the substance of the article in future own works, including lectures and books,
- The right to reproduce the article for own purposes, provided the copies are not offered for sale,
- The right to self-archive the article.
5. Co-Authorship
If the article was jointly prepared by other authors, the signatory of this form warrants that he/she has been authorized by all co-authors to sign this agreement on their behalf, and agrees to inform his/her co-authors of the terms of this agreement.
6. Termination
This agreement can be terminated by the author or JFU upon two months notice where the other party has materially breached this agreement and failed to remedy such breach within a month of being given the terminating partys notice requesting such breach to be remedied. No breach or violation of this agreement will cause this agreement or any license granted in it to terminate automatically or affect the definition of JFU.
7. Royalties
This agreement entitles the author to no royalties or other fees. To such extent as legally permissible, the author waives his or her right to collect royalties relative to the article in respect of any use of the article by JFU or its sublicensee.
8. Miscellaneous
JFU will publish the article (or have it published) in the journal if the articles editorial process is successfully completed and JFU or its sublicensee has become obligated to have the article published. JFU may conform the article to a style of punctuation, spelling, capitalization, referencing and usage that it deems appropriate. The author acknowledges that the article may be published so that it will be publicly accessible and such access will be free of charge for the readers.
