Pembuatan dan Karakterisasi Bolus Berbahan Silicone Rubber RTV 00A
DOI:
https://doi.org/10.25077/jfu.13.5.704-710.2024Keywords:
RTV 00A, PSD, RED, physical properties, mechanical propertiesAbstract
The manufacture and characterization of boluses made from Silicone Rubber RTV 00A with 4% clear catalyst composition have been carried out. The bolus was made with a size of (15x15) cm and the thickness of 1.0 cm. Each bolus sample was characterized to obtain physical properties (density and water absorption capacity), mechanical properties (tensile strength, strain, and elastic modulus), Relative Electron Density (RED), Percentage Surface Dose (PSD), and absorbed dose. RED value were obtained through tomographic images using a CT-Simulator by determining 5 Region of Interest (ROI) points. PSD and absorbed dose values were measured using a plan parallel chamber detector with energy of 9 MeV. The bolus has a density of (0.815 ± 0.150) g/cm³ and water absorption of (12.42 ± 0.01)%, tensile strength of (0.286 ± 0.091) MPa, an elongation of (22.93 ± 0.22)%, and an elastic modulus of (5.880 ± 11.52) MPa. The RED value of (1.114 ± 0.021) g/cm³ a PSD of 132.40% and an absorbed dose of 233.82 cGy in energy of 9 MeV. RTV 00A can be developed as a bolus base material.
References
Ardiati, M. (2016). Sintesis dan Karakterisasi Komposit Polyester Serat Daun Lontar dengan Penambahan Variasi Konsentrasi Kalium Permanganat (KMnO4) [Skripsi]. Universitas Airlangga, 16.
Astuti, S. Y., Sutanto, H., Hidayanto, E., Jaya, G. W., Supratman, A. S., & Saraswati, G. P. (2018b). Characteristics of Bolus Using Silicone Rubber with Silica Composites for Electron Beam Radiotherapy. Journal of Physics and Its Applications, 1(1), 24. https://doi.org/10.14710/jpa.v1i1.3914
Endarko, E., Aisyah, S., Carina, C. C. C., Nazara, T., Sekartaji, G., & Nainggolan, A. (2021). Evaluation of dosimetric properties of handmade bolus for megavoltage electron and photon radiation therapy. Journal of Biomedical Physics and Engineering, 11(6), 735-746. https://doi.org/10.31661/jbpe.v0i0.2004-1108
Fathin, H. A., Sutanto, H., & Hidayanto, E. (2021). Fabrication of Bolus from Composite of Silicone Rubber (SR)-Copper (Cu) for Radiotherapy Application. International Journal of Science and Research, 10(6), 730-734. https://doi.org/10.21275/SR21608081053
Fitriani, R., Subagiada, K., Muliyono, S., Stevenly, R. J., & Suryaningsih, S. (2022). Analisis Penggunaan Bolus Berbahan Plastisin pada Pasien Fibrosarcoma dengan Treatment Planning System (TPS). Progressive Physics Journal, 3(1), 100. https://doi.org/10.30872/ppj.v3i1.818
Guswantoro, T., Supratman, A. S., & Asih, I. S. (2020). Karakterisasi Alginat Sebagai Bahan Setara Dengan Jaringan Lunak Untuk Radioterapi. Jurnal EduMatSains, 4(2), 125-138.
Jaya, G. W., Sutanto, H., Hidayanto, E., & Saraswati, G. P. (2020a). Progressive Physics Journal. Progressive Physics Journal, 1(2017), 15-19.
Junaedi, D., Setiawati, E., Arifin, Z., & Ramantisa, S. (2016). Analisis Penggunaan Polydimethyl Siloxane Sebagai Bolus Dalam Radioterapi Menggunakan Elektron 8 MeV Pada Linac. In Youngster Physics Journal (Vol. 5, Issue 4).
Kajai, N., & Barat, P. (2020). Universitas andalas padang 2020.
Ooi, L. S. M., Sun, S. S. M., Wang, H., & Ooi, V. E. C. (2004). New mannose-binding lectin from the rhizome of sarsaparilla Smilax glabra Roxb. (Liliaceae). Journal of Agricultural and Food Chemistry, 52(20), 6091-6095. https://doi.org/10.1021/jf030837o
Sutanto, H., Hidayanto, E., Wiratama, G. J., Astuti, S. Y., & Suparman, A. S. (2018). Bolus Berbahan Silicone.
Sutanto, H., Marhaendrajaya, I., Jaya, G. W., Hidayanto, E., Supratman, A. S., Astuti, S. Y., Budiono, T., & Firmansyah, M. A. (2019). The Properties of Bolus Material using Silicone Rubber. IOP Conference Series: Materials Science and Engineering, 622(1). https://doi.org/10.1088/1757-899X/622/1/012002
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 Dewi Fajriani, Afdhal Muttaqin H.S, Muhammad Ilyas
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Please find the rights and licenses in JFU (Jurnal Fisika Unand).
1. License
The non-commercial use of the article will be governed by the Creative Commons Attribution license as currently displayed on Creative Commons Attribution-NonCommercial 4.0 International License.
2. Authors Warranties
The author warrants that the article is original, written by stated author(s), has not been published before, contains no unlawful statements, does not infringe the rights of others, is subject to copyright that is vested exclusively in the author and free of any third party rights, and that any necessary written permissions to quote from other sources have been obtained by the author(s).
3. User Rights
JFU's spirit is to disseminate articles published are as free as possible. Under the Creative Commons license, JFU permits users to copy, distribute, display, and perform the work for non-commercial purposes only. Users will also need to attribute authors and JFU on distributing works in the journal.
4. Rights of Authors
Authors retain the following rights:
- Copyright, and other proprietary rights relating to the article, such as patent rights,
- The right to use the substance of the article in future own works, including lectures and books,
- The right to reproduce the article for own purposes, provided the copies are not offered for sale,
- The right to self-archive the article.
5. Co-Authorship
If the article was jointly prepared by other authors, the signatory of this form warrants that he/she has been authorized by all co-authors to sign this agreement on their behalf, and agrees to inform his/her co-authors of the terms of this agreement.
6. Termination
This agreement can be terminated by the author or JFU upon two months notice where the other party has materially breached this agreement and failed to remedy such breach within a month of being given the terminating partys notice requesting such breach to be remedied. No breach or violation of this agreement will cause this agreement or any license granted in it to terminate automatically or affect the definition of JFU.
7. Royalties
This agreement entitles the author to no royalties or other fees. To such extent as legally permissible, the author waives his or her right to collect royalties relative to the article in respect of any use of the article by JFU or its sublicensee.
8. Miscellaneous
JFU will publish the article (or have it published) in the journal if the articles editorial process is successfully completed and JFU or its sublicensee has become obligated to have the article published. JFU may conform the article to a style of punctuation, spelling, capitalization, referencing and usage that it deems appropriate. The author acknowledges that the article may be published so that it will be publicly accessible and such access will be free of charge for the readers.