Sistem Monitoring Suhu dan Kadar Air pada Mesin Pengering Padi Berbasis Internet of Things
DOI:
https://doi.org/10.25077/jfu.13.4.483-489.2024Keywords:
Water level; LCD; Paddy dryer; sensor SEN0308Abstract
Paddy drying is an activity to remove the excess of water content within paddy to achieve a better rice quality during the grinding process. Farmers often determine water level based on experience, such as biting the rice, if the skin breaks, it means the rice is ready to be grinded. This research examines a monitoring system on a paddy drying machine in order to obtain a higher quality paddy to be made into rice. On the machine, there is a hearing element to raise the temperature of the drying tank. The rise of the temperature of the drying tank must be monitored to maintain that the temperature is always within the pre-determined threshold. The monitoring system uses DHT11 and SEN0308 sensors connected to ESP32 module as data processing center, before being displayed on an LCD indicator or a smart phone. Accuracy Test results for sensors show both sensor readings are above 90%. The temperature and water level data of the paddy during the drying process can be seen live on an LCD indicator or a smart phone as an accurate information.
References
Dr. Sri Rahayoe, ST., MP, Teknik Pengeringan, Artikel 2017, https://teknik-pengeringan.tp.ugm.ac.id/2017/10/28/teknik-pengeringan/ diakses tanggal 5 Mei 2023.
Sri Septi Dyah Pratiwi, Sudarti, Trapsilo Prihandono, Alat Pengering Padi Tenaga Surya Berbasis IoT Sebagai Upaya Pengurangan Gagal Panen Petani Padi, Jurnal Ilmiah Teknologi Pertanian AGROTECHNO, Volume 7, Nomor 1, April 2022
Afriandika Brillian, Purwanto, Rahmadwati, Pengendalian Temperatur pada Proses Pengeringan Gabah Menggunakan Alat Rotary, Jurnal Mahasiswa TEUB Vol. 3, No. 7, tahun 2015
Rohmat Figiarto, Sheila Luvi Galvani, M. Djaeni, Peningkatan Kualitas Gabah Dengan Proses Peningkatan Kualitas Gabah Dengan Proses Pengeringan Menggunakan Zeolit Alam, Jurnal Teknologi Kimia Jurnal Teknologi Kimia dan Industri, Vol. 1, No. 1, Tahun 2012
Yuliyantika, Sudarti, Mekanisme Beberapa Mesin Pengering Pertanian , Jurnal Penelitian Fisika dan Terapannya (Jupiter), 4 (1), tahun 2022
Pangestu Hadi Iswanto, Dr. Ir. Arief RM Akbar, Msi, Alia Rahmi S.TP.MengSc, Pengaruh Kadar Air Gabah Terhadap Mutu Beras Pada Varietas Padi Lokal Siam Sabah, JTAM Inovasi Agroindustri, Vol.1., No.1 tahun 2018
Badan Standardisasi Instrumen Pertanian (BSIP), Warta BIP Pasca panen, 2023
Muhammad Syaifulloh, Perbedaan Gabah Kering Giling dan Gabah Kering Panen Sebelum Menjadi Beras, https://tekno.tempo.co/read/1679012/perbedaan-gabah-kering-giling-dan-gabah-kering-panen-sebelum-menjadi-beras, Januari 2023, tanggal akses 23 Oktober 2023.
Novia Ulfa Oktavianty, Wildian, Rancang Bangun Alat Ukur dan Indikator Kadar Air Gabah Siap Giling Berbasis Mikrokontroler dengan Sensor Fotodioda, Jurnal Fisika Unand Vol. 5, No. 1, Januari 2016.
Ahmad Zainudin dkk., Pemanfaatan Alat Monitoring Kadar Air Pada Gabah untuk Peningkatkan Kualitas Panen, Jurnal Pengabdian Kepada Masyarakat DIKEMAS VOL. 4, No. 2 Tahun 2020
Arfiati Ulfa Utami, Rosiana Ulfa, Efek Lama Pengeringan Terhadap Kadar Air Gabah Dan Mutu Beras Ketan, Jurnal Teknologi Pangan Dan Ilmu Pertanian (Jipang) Vol. 4 No. 1 (2022).
Datasheet DHT11[Online], tersedia pada, https://html.alldatasheet.com/html-pdf/ 1440068/ETC/DHT11/60/1/DHT11.html, diakses tanggal 23 Okt 2023
"SKU:SEN0308," DFROBOT, [Online]. Available: https://wiki.dfrobot.com/ Waterproof_Capacitive_Soil_Moisture_Sensor_SKU_SEN0308, diakses 23 Otki 2023.
Equan P, Mengenal MQTT, artikel Oktober 2015 pada https://medium.com/pemrograman/ mengenal-mqtt-998b6271f585, diakses bulan November 2023
Published
Issue
Section
License
Copyright (c) 2024 Syaifurrahman Syaifurrahman
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Please find the rights and licenses in JFU (Jurnal Fisika Unand).
1. License
The non-commercial use of the article will be governed by the Creative Commons Attribution license as currently displayed on Creative Commons Attribution-NonCommercial 4.0 International License.
2. Authors Warranties
The author warrants that the article is original, written by stated author(s), has not been published before, contains no unlawful statements, does not infringe the rights of others, is subject to copyright that is vested exclusively in the author and free of any third party rights, and that any necessary written permissions to quote from other sources have been obtained by the author(s).
3. User Rights
JFU's spirit is to disseminate articles published are as free as possible. Under the Creative Commons license, JFU permits users to copy, distribute, display, and perform the work for non-commercial purposes only. Users will also need to attribute authors and JFU on distributing works in the journal.
4. Rights of Authors
Authors retain the following rights:
- Copyright, and other proprietary rights relating to the article, such as patent rights,
- The right to use the substance of the article in future own works, including lectures and books,
- The right to reproduce the article for own purposes, provided the copies are not offered for sale,
- The right to self-archive the article.
5. Co-Authorship
If the article was jointly prepared by other authors, the signatory of this form warrants that he/she has been authorized by all co-authors to sign this agreement on their behalf, and agrees to inform his/her co-authors of the terms of this agreement.
6. Termination
This agreement can be terminated by the author or JFU upon two months notice where the other party has materially breached this agreement and failed to remedy such breach within a month of being given the terminating partys notice requesting such breach to be remedied. No breach or violation of this agreement will cause this agreement or any license granted in it to terminate automatically or affect the definition of JFU.
7. Royalties
This agreement entitles the author to no royalties or other fees. To such extent as legally permissible, the author waives his or her right to collect royalties relative to the article in respect of any use of the article by JFU or its sublicensee.
8. Miscellaneous
JFU will publish the article (or have it published) in the journal if the articles editorial process is successfully completed and JFU or its sublicensee has become obligated to have the article published. JFU may conform the article to a style of punctuation, spelling, capitalization, referencing and usage that it deems appropriate. The author acknowledges that the article may be published so that it will be publicly accessible and such access will be free of charge for the readers.
.png)
