Desain Sistem Smart Feeder Ayam Berbasis Internet of Things (IoT) Guna Mencegah Keterlambatan Pemberian Pakan

Authors

  • Elvinda Bendra Agustina Institut Teknologi dan Sains Nahdlatul Ulama Pekalongan
  • Dian Arif Rachman Institut Teknologi dan Sains Nahdlatul Ulama Pekalongan
  • Recha Nofillah Institut Teknologi dan Sains Nahdlatul Ulama Pekalongan
  • Lia Ikhlasia Fitri Institut Teknologi dan Sains Nahdlatul Ulama Pekalongan

DOI:

https://doi.org/10.25077/jfu.13.2.297-302.2024

Keywords:

Smart Feeder, Internet of Things, Pakan Ayam, Esp32

Abstract

Pemberian pakan ayam secara manual menjadikan pemberian pakan ayam kurang efektif dan efisien. Pengembangan sistem pemberi pakan ayam cerdas berbasis Internet ofThings (IoT) telah dilakukan. Penelitian ini bertujuan untuk mengembangkan desain sistem smart feeder ayam berbasis IoT guna mencegah keterlambatan pemberian pakan. Memungkinkan alat bekerja dengan melakukan kontrol feeder berdasarkan pengaturan waktu, monitoring hopper secara otomatis yang diintegrasikan dengan IoT. Setiap device dihubungkan dengan internet sehingga dapat dipantau dari jarak jauh. Metode yang digunakan adalah perancangan dan telah dilakukan uji dan pengambilan data. Hasil uji aplikasi Blynk menunjukkan ketepatan pengaturan yang telah diberikan dengan kondisi real. Fungsi sistem alat sudah sesuai dengan desain sistem yang direncanakan. Rata-rata persentase error yang terjadi 14% secara keseluruhan tetapi mengecil sampai rata-rata 3% pada berat pakan diatas 5 kg dikarenakan semakin besar volume hopper maka jarak antara sensor ke pakan semakin dekat sehingga nilai error semakin rendah. Pengujian NTP menunjukkan nilai akurasi dan kepresisian 100%. Uji kecepatan rotasi menunjukkan rata-rata kecepatan rotasi hopper yaitu 445,4 rpm sehingga hopper berotasi sesuai dengan perkiraan. Uji volume distribusi pakan sudah sesuai karna pakan 1 diletakkan paling dekat dengan hopper sehingga volume pakan akan terisi paling banyak di bandingkan dengan tempat pakan lainnya

References

Anggreani, D., Nasution, M.I., & Nasution, N. (2023). Sistem Penyortir Otomatis Kematangan Tomat Berdasarkan Warna dan Berat dengan Sensor TCS3200 dan Sensor Load Cell HX711 Berbasis Arduino Uno. Jurnal Fisika Unand (JFU), 12(3). https://doi.org/10.25077/jfu.12.3.374-380.2023

Costrada, A.N., Arifah, A.G., Putri, I. D., Sawita, I. K.A.S., & Djamal, H. M. (2022). Design of Heart Rate, Oxygen Saturation, and Temperature Monitoring System for Covid-19 Patient Based on Internet of Things (IoT). Jurnal Ilmu Fisika (JIF), 14(1). https://doi.org/10.25077/jif.14.1.54-63.2022

Friendly, Harizahayu, Prayudani, S., & Sembiring, Z. (2022). Perancangan Dan Pembuatan Alat Pemberi Pakan Otomatis Berbasis Iot Pada Umkm Kampung Ternak Kecamatan Lubuk Pakam Kabupaten Deli Serdang Sumatera Utara. Jurnal Pengabdian Kepada Masyarakat, 1(3). https://doi.org/10.55681/swarna.v1i3.143

Hamid, F.F., & Harmadi. (2023). Sistem Kontrol Kualitas Air Pada Akuarium Ikan Hias Air Tawar dan Monitoring Via Telegram Berbasis IoT. Jurnal Fisika Unand (JFU),

(3).https://doi.org/10.25077/jfu.12.3.452-458.2023

Aziz, A., Winarno, & Haryanti, T. (2020). Rancang Bangun Sistem Pakan Ternak Otomatis Berbasis Arduino Dan Load Cell. Jurnal Ilmiah Computing Insight. 2(1). https://doi.org/10.30651/ci:jcs.v2i1.5895

Putri, R.E., Putra, M., & Fahmy, K. (2022). Pengembangan Sistem Pemberi Pakan Ayam Cerdas Berbasis Internet Of Things (IoT). Jurnal Teknologi Pertanian Andalas. 26(1). https://doi.org/10.25077/jtpa.26.1.27-37.2022

Downloads

Published

2024-03-05

How to Cite

Agustina, E. B., Rachman, D. A., Nofillah, R., & Fitri, L. I. (2024). Desain Sistem Smart Feeder Ayam Berbasis Internet of Things (IoT) Guna Mencegah Keterlambatan Pemberian Pakan. Jurnal Fisika Unand, 13(2), 297–302. https://doi.org/10.25077/jfu.13.2.297-302.2024

Issue

Vol. 13 No. 2 (2024)

Section

Articles

License

Copyright (c) 2024 elvinda bendra agustina

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

Please find the rights and licenses in JFU (Jurnal Fisika Unand).

1. License

The non-commercial use of the article will be governed by the Creative Commons Attribution license as currently displayed on Creative Commons Attribution-NonCommercial 4.0 International License.

2. Authors Warranties

The author warrants that the article is original, written by stated author(s), has not been published before, contains no unlawful statements, does not infringe the rights of others, is subject to copyright that is vested exclusively in the author and free of any third party rights, and that any necessary written permissions to quote from other sources have been obtained by the author(s).

3. User Rights

JFU's spirit is to disseminate articles published are as free as possible. Under the Creative Commons license, JFU permits users to copy, distribute, display, and perform the work for non-commercial purposes only. Users will also need to attribute authors and JFU on distributing works in the journal.

4. Rights of Authors

Authors retain the following rights:

  • Copyright, and other proprietary rights relating to the article, such as patent rights,
  • The right to use the substance of the article in future own works, including lectures and books,
  • The right to reproduce the article for own purposes, provided the copies are not offered for sale,
  • The right to self-archive the article.

5. Co-Authorship

If the article was jointly prepared by other authors, the signatory of this form warrants that he/she has been authorized by all co-authors to sign this agreement on their behalf, and agrees to inform his/her co-authors of the terms of this agreement.

6. Termination

This agreement can be terminated by the author or JFU upon two months notice where the other party has materially breached this agreement and failed to remedy such breach within a month of being given the terminating partys notice requesting such breach to be remedied. No breach or violation of this agreement will cause this agreement or any license granted in it to terminate automatically or affect the definition of JFU.

7. Royalties

This agreement entitles the author to no royalties or other fees. To such extent as legally permissible, the author waives his or her right to collect royalties relative to the article in respect of any use of the article by JFU or its sublicensee.

8. Miscellaneous

JFU will publish the article (or have it published) in the journal if the articles editorial process is successfully completed and JFU or its sublicensee has become obligated to have the article published. JFU may conform the article to a style of punctuation, spelling, capitalization, referencing and usage that it deems appropriate. The author acknowledges that the article may be published so that it will be publicly accessible and such access will be free of charge for the readers.